Jump Cue
Jacoby Jump Cues
jcext-brown
Brown stained curly maple handle w/finger groove at the joint for a 'darting' technique and a bell at the end for a 'stroking' technique. It has a 6" extension that is removable. The shaft has a stiff taper with a 13mm phenolic tip and a 3/4" brass ferrule. The total length of the cue assembled is 46", consisting of a 29" shaft and 17" butt. The length of the butt including pin and bumper is 18.25". |
jcext-nat
Curly maple handle w/finger groove at the joint for a 'darting' technique and a bell at the end for a 'stroking' technique. It has a 6" extension that is removable. The shaft has a stiff taper with a 13mm phenolic tip and a 3/4" brass ferrule. The total length of the cue assembled is 46", consisting of a 29" shaft and 17" butt. The length of the butt including pin and bumper is 18.25". |
jcext-gree
Green stained curly maple handle w/finger groove at the joint for a 'darting' technique and a bell at the end for a 'stroking' technique. It has a 6" extension that is removable. The shaft has a stiff taper with a 13mm phenolic tip and a 3/4" brass ferrule. The total length of the cue assembled is 46", consisting of a 29" shaft and 17" butt. The length of the butt including pin and bumper is 18.25". |
jcext-blue
Blue stained curly maple handle w/finger groove at the joint for a 'darting' technique and a bell at the end for a 'stroking' technique. It has a 6" extension that is removable. The shaft has a stiff taper with a 13mm phenolic tip and a 3/4" brass ferrule. The total length of the cue assembled is 46", consisting of a 29" shaft and 17" butt. The length of the butt including pin and bumper is 18.25". |
jc-green
Green stained curly maple handle w/finger groove at the joint for a 'darting' technique and a bell at the end for a 'stroking' technique. The shaft has a stiff taper with a 13mm phenolic tip and a 3/4" brass ferrule. The total length of the cue assembled is 41", consisting of a 29" shaft and 12" butt. The length of the butt including pin and bumper is 13.5" (for storage purposes). |
jc-natural
Curly maple handle w/finger groove at the joint for a 'darting' technique and a bell at the end for a 'stroking' technique. The shaft has a stiff taper with a 13mm phenolic tip and a 3/4" brass ferrule. The total length of the cue assembled is 41", consisting of a 29" shaft and 12" butt. The length of the butt including pin and bumper is 13.5" (for storage purposes). |
jc-brown
Brown stained curly maple handle w/finger groove at the joint for a 'darting' technique and a bell at the end for a 'stroking' technique. The shaft has a stiff taper with a 13mm phenolic tip and a 3/4" brass ferrule. The total length of the cue assembled is 41", consisting of a 29" shaft and 12" butt. The length of the butt including pin and bumper is 13.5" (for storage purposes). |
jc-grey
Grey stained curly maple handle w/finger groove at the joint for a 'darting' technique and a bell at the end for a 'stroking' technique. The shaft has a stiff taper with a 13mm phenolic tip and a 3/4" brass ferrule. The total length of the cue assembled is 41", consisting of a 29" shaft and 12" butt. The length of the butt including pin and bumper is 13.5" (for storage purposes). |
| 1 to 8 of 8