Scroll To Top

Standard Jump Cues

Jump Cue Bumper

Replacement Bumper for the Jacoby Jumper and Extension Jump Cues.

more info


Jumper Black

Red stained curly maple handle w/finger groove at the joint for a 'darting' technique and a bell at the end for a 'stroking' technique. The shaft has a stiff taper with a 13mm G10 tip and a 3/4" brass ferrule. The total length of the cue assembled is 41", consisting of a 29" shaft and 12" butt. The length of the butt including pin and bumper is 13.5" (for storage purposes). The Jumper Has a Radial Pin as well as a Weight System to enhance the shot. 

more info


Jumper Blue

Blue stained curly maple handle w/finger groove at the joint for a 'darting' technique and a bell at the end for a 'stroking' technique. The shaft has a stiff taper with a 13mm G10  tip and a 3/4" brass ferrule. The total length of the cue assembled is 41", consisting of a 29" shaft and 12" butt. The length of the butt including pin and bumper is 13.5" (for storage purposes). The Jumper Has a Radial Pin as well as a Weight System to enhance the shot. 

more info


Jumper Brown

Brown stained curly maple handle w/finger groove at the joint for a 'darting' technique and a bell at the end for a 'stroking' technique. The shaft has a stiff taper with a 13mm G10 tip and a 3/4in brass ferrule. The total length of the cue assembled is 41in consisting of a 29in shaft and 12in butt. The length of the butt including pin and bumper is 13.5in (for storage purposes). The Jumper Has a Radial Pin as well as a Weight System to enhance the shot.

more info


Jumper Green

Green stained curly maple handle w/finger groove at the joint for a 'darting' technique and a bell at the end for a 'stroking' technique. The shaft has a stiff taper with a 13mm G10 tip and a 3/4" brass ferrule. The total length of the cue assembled is 41", consisting of a 29" shaft and 12" butt. The length of the butt including pin and bumper is 13.5" (for storage purposes). The Jumper Has a Radial Pin as well as a Weight System to enhance the shot.

more info


Jumper Grey

Grey stained curly maple handle w/finger groove at the joint for a 'darting' technique and a bell at the end for a 'stroking' technique. The shaft has a stiff taper with a 13mm G10 tip and a 3/4in brass ferrule. The total length of the cue assembled is 41in consisting of a 29in shaft and 12in butt. The length of the butt including pin and bumper is 13.5in(for storage purposes). The Jumper Has a Radial Pin as well as a Weight System to enhance the shot.

more info


Jumper Natural

Red stained curly maple handle w/finger groove at the joint for a 'darting' technique and a bell at the end for a 'stroking' technique. The shaft has a stiff taper with a 13mm G10 tip and a 3/4" brass ferrule. The total length of the cue assembled is 41", consisting of a 29" shaft and 12" butt. The length of the butt including pin and bumper is 13.5" (for storage purposes). The Jumper Has a Radial Pin as well as a Weight System to enhance the shot.

more info


Jumper Red

Red stained curly maple handle w/finger groove at the joint for a 'darting' technique and a bell at the end for a 'stroking' technique. The shaft has a stiff taper with a 13mm G10 tip and a 3/4" brass ferrule. The total length of the cue assembled is 41", consisting of a 29" shaft and 12" butt. The length of the butt including pin and bumper is 13.5" (for storage purposes). The Jumper Has a Radial Pin as well as a Weight System to enhance the shot.

more info